Other milling equipment

Impact machine BER

Impact machine BER

Impact machine, Model R1-BER is meant for grits and dunsts blending in the process of graded flour manufacture. Scope of application: milling sections. Impact machine operates with other equipment types, being a part of the Flour mill process flow.

Technical characteristics

Parameter   Value
Throughput, t/h, within the range   1,5-2,3
Additional flour release, %, not less than   15
Installed power, kW   4,0
Overall dimensions, mm length 
width 
height
677
700
610
Mass, kg, not exceeding   172

Detacher BD

Detacher BD.jpg

Detacher, Model BD is meant for blending grain ground materials following roller mills at milling sections for increasing flour release.

Technical characteristics

Parameter   Value
Throughput, t/h, not less than   0,4-0,7
Efficiency of intermediate ground materials blending following roller mills,
 %, not less than
  10
Nominal power of the electric motor installed, kW   1,5
Overall dimensions, mm length 
width 
height
1000 
380 
450
Mass, kg, not exceeding   80

Abrasive grain cleaning machine BOS

Abrasive grain cleaning machine BOS.jpg

Abrasive grain cleaning machine, Model BOS is meant for the upper grain cover treatment at Flour mills. During graded milling process the grain passes through the machines at least twice.

Technical characteristics

Parameter   Value
Throughput, t/h   6
Nominal installed motor power, kW   7,5
Air consumption, m3/h, not less than   430
Overall dimensions, mm not exceeding length 
width 
height
1400 
750 
1600
Mass, kg, not exceeding   400

Humidifying machine BUS

Humidifying machine BUS.jpg

Grain humidifying machine, Model BUS is meant for grain damping at the Flour mill preparation section.

Technical characteristics

Parameter   Value
Throughput while treating wheat with the bulk weight 0,75 t/m3 and moisture content 15%,
 t/h
  5-7
Grain dampness increase, %   3-4
Water consumption, l/h, not exceeding   250
Electric motor power, kW   4
Overall dimensions, mm not exceeding length 
width 
height
2145 
490 
1745
Mass, kg, not exceeding   300

Finisher-type bran duster MBO

Finisher-type bran duster MBO.jpg

Finisher-type bran duster, Model MBO is meant for preliminary sorting of grain blending products following roller mills and additional remainder removal while graded flour manufacture. The machine is operated at Flour mills.

Technical characteristics

Parameter   R1-MBO R1-MBO-01 R1-MBO-02 R1-MBO-03
Throughput, t/h, not less than   5,0-6,5 4,5-5,0 3,0-4,0 2,5-3,0
Nominal installed motor power, kW   5,5 4,0 4,0 4,0
Overall dimensions, mm not exceeding length 
width 
height
1365
555
1369
1365
555
1369
1365 
555 
1369
1365
555
1369
Mass, kg, not exceeding   250 250 250 250

Ventilating fan, series VR

Ventilating fan, series VR.jpg

Ventilating fans, Models VR-120-28-8-2, VR-175-15-5.1, VR-175-19-5.1 are meant for air moving inside stationary ventilation systems and pneumatic systems with the dust content not exceeding 100 mg/m3. Environmental temperature from –400°С to +400°С. 

Technical characteristics

Parameter VR-120-28-8-2 VR-175-15-5.1 VR-175-19-5.1
Propeller rotation frequency, rev./min. 2200 2850 3000
Throughput, 103 m3/h 4,8 1,3-1,48 4,0
Total pressure, kPa in the working area 6,8-5,6 5,55-5,72 5,75-6,47
Consumed power, kW 15 4,95 6,75
Installed power, kW 18,5 5,5 7,5

Stone extractor BKM-6

Stone extractor, Model BKM-6 is meant for grain cleaning from mineral impurities by dry method at grain-processing plants.

Technical characteristics

Parameter   R1-BKM-6
Throughput while wheat cleaning, t/h, not less than   6,5
Efficiency of grain cleaning from mineral impurities, %, not less than   97
Installed drive power (without ventilator), kW, not exceeding   0,37
Air consumption, m3/h, not exceeding   4800
Overall dimensions, mm, not exceeding length 
width 
height
1880 
1420 
1780
Mass, kg, not exceeding   275

Magnetic column DKM

Magnetic columns are meant for extracting metal foreign matters out of free running products; magnetic columns operate inside closed rooms at temperature from -30°С to +40°C.

Technical characteristics

Parameter   R1-DKM
Maximum throughput, for wheat, feed stuff, flour, oil cakes, press cakes, t/h, not less than   6
Fish flour, tankage, bone scraps, feather meal, grass meal, yeast, mineral raw materials, t/h, not less than   3
Efficiency of cleaning from metal foreign matters, %, not less than

with the size exceeding 2 mm

with the size less than 2 mm

100

80

Overall dimensions, mm, not less than length 
width 
height
220 
220 
240
Mass, kg, not exceeding  

20